TST LoadCheck Formaldehyde
Designed as a penetration test for use in low temperature steam / formaldehyde (LTSF) sterilizers. It is a challenge test for determining whether steam / formaldehyde vapour is penetrating into the lumen type device.
If steam / formaldehyde vapour penetrates through the end of the tube, the indicator will show a defined colour change from blue to green.
Pack Size: 200 Tests
- Product Downloads
Loadchecks are Process Challenge Devices designed to test the sterilant penetration capability of the sterilizer and are made up of a barrier system, inside of which is a chemical indicator. The Browne Loadchecks use the helix method as their barrier system whereby sterilant has to penetrate down the helical tubing to reach the indicator at its centre. The Browne helix has been specifically designed and tested to eliminate many of the common problems associated with traditional helical designs.
Ergonomic design: Incorporates an easy grip cover together with a flatter indicator casing to allow easy opening and closing.
Plastic & PTFE construction: Cools down much quicker than metal so staff can handle sooner with less risk.
Radial seal with ‘stop’: Creates a perfect seal every time. Twist the cap to close it, and the tightening ‘stop’ prevents ‘over’ or ‘under’ tightening that can distort the seal and give erroneous results.